Logo Logo UNZE
    Fakultetska 1, 72000 Zenica, Bosnia and Herzegovina | Tel. +387 32 449 120 | Fax. +387 32 246 612 
 Na bosanskom jeziku  Prof. Nermina Zaimović-Uzunović, Ph.D. - publications
Books, scripts and monographies
  1. D. Vukojević, N. Zaimović-Uzunović, N. Hodžić, N. Vukojević, J. Kačmarčik: "Tehnička mehanika I", ISBN 9958-617-43-0, Univerzitet u Zenici, Zenica, 2009
  2. Zaimović-Uzunović Nermina; Lemeš Samir; Denjo Daut; Softić Almira: "Proizvodna mjerenja", ISBN 9958-617-44-7, Univerzitet u Zenici, Zenica, 2009
  3. Oruč M., Zaimović-Uzunović N., Klobodanović A., Mjerenje karakteristika procesa, ISBN 978-9958-617-39-3, Mašinski fakultet u Zenici, 2008
  4. Zaimović-Uzunović, N., Vukojević D., Hodžić N., Žiga A.: Statika (Statics), ISBN 9958-61-737-9, Mašinski fakultet u Zenici, 2007
  5. Mjerenje u teoriji i praksi, zbornik radova studenata postdiplomskog studija "Metrologija" (Measurements in theory and practice, Students' articles proceedings from postgraduate course "Metrology") , edited by Zaimović-Uzunović N., ISBN 9958-617-32-4, Mašinski fakultet u Zenici, 2007
  6. Zaimović-Uzunović, N., Hodžić N.: Praktikum iz Statike - drugo izdanje (Practicum in Statics - second edition), Mašinski fakultet u Zenici, 2006
  7. Zaimović-Uzunović, N.: Mjerna tehnika (Metrology), WUS Austria, 2006
  8. Zaimović-Uzunović, N. i grupa autora: Elastostatika I (Elastostatics),  Univerzitetska knjiga,
    Bihać, 2003
  9. Zaimović-Uzunović, N. : Mjeriteljska infrastruktura (Metrological Infrastructure), Mašinski fakultet u Zenici, 2003
  10. Zaimović-Uzunović, N, Lemeš, S. : Metod konačnih elemenata (Finite Element Method), ISBN 9958-42-079-1, Dom štampe, 2002
  11. Zaimović-Uzunović, N.: Mjerna tehnika (Metrology), Mašinski fakultet u Zenici, 1997
  12. Zaimović-Uzunović, N., Hodžić N.: Praktikum iz Statike, Mašinski fakultet u Zenici, 1996
  13. Zaimović-Uzunović, N.: Zbirka riješenih zadataka iz Kinematike sa izvodima iz teorije (Compendium of problems in Kinematics), Mašinski fakultet u Zenici, 1990
  14. Zaimović-Uzunović, N.: Zbirka riješenih zadataka iz Mehanike I (Statika) sa izvodima iz teorije (Compendium of problems in Mechanics I Statics), Mašinski fakultet Zenica, 1988
Papers published in conferences and journals and research projects
 
  1. Nermina Zaimović-Uzunović, Hazim Bašić, Almira Softić, "Intercomparation excellent tool for testing laboratory methods and practice", 11th International Symposium on Measurement and Quality Control,Cracow-Kielce,11-13 September 2013.
  2. Lemeš Samir, Čabaravdić Malik, Zaimović.Uzunović Nermina, "Robotic manipulation in dimensional measurement", XXIV International Conference on Information, Communication and Automation Technologies ICAT 2013, Sarajevo, 30.10-01.11.2013.
  3. Lemeš S., Zaimović-Uzunović N., Ališić Š., Memić H. (2012) Development Of Competences Of National Reference Laboratory For Mass Measurement, Proceedings /5th International Symposium on Industrial Engineering - SIE2012, June 14-15, 2012., Belgrade, (Editors: Milanović D.D., Spasojević-Brkić V., Misita M.) pp 273-276, ISBN 978-86-7083-758-4
  4. Ćurić D., Lemeš S., Zaimović-Uzunović N. (2011) Non-proportional shrinkage compensation, Conference proceedings: 8th International Conference on Industrial Tools and Material Processing Technologies ICIT & MPT, Ljubljana, Slovenia, October 2nd-5th 2011; Janez Marko Slabe, editor, pp 173-176 ISBN 978-961-6692-02-1
  5. Mrđanović Elma, Lemeš Samir, Zaimović-Uzunović Nermina (2011) Funkcionalna analiza dizajna okova za masivni namještaj (Functional Analysis of the Bed Hinge Design), 7th International conference "Quality 2011" (S. Brdarević, S. Jašarević, editors), pp 323-328, ISSN 1512-9268, Neum, 01-04 June 2011
  6. E. Terzić, E. Turzo-Andras, N. Zaimović-Uzunović, R. Seferović, J. Bojkovski: "New prototype apparatus for calibration of surface temperature sensors", Joint International Symposium on Temperature, Humidity, Moisture and Thermal Measurements in Industry and Science TEMPMEKO & ISHM 2010, May 31st - June 4th 2010, Portorož, Slovenia, Book of abstracts, Volume B, pp 320, editor: Bojkovski J., ISBN 978-961-243-146-4
  7. Denjo D., Zaimović-Uzunović N.: "Accreditation of laboratory for dimensional metrology with the aspect of laboratory quality", International Scientific Conference on Engineering "Manufacturing and Advanced Technologies" MAT 2010, Mostar, 18-20 November 2010
  8. Zaimović-Uzunović N., Lemeš S.: "Influences of Surface Parameters On Laser 3D Scanning", IMEKO Conference proceedings: International Symposium on Measurement and Quality Control 2010 (ISMQC2010, September 5-9, 2010, Osaka, Japan)
  9. S. Lemeš, N. Zaimović-Uzunović: STUDY OF AMBIENT LIGHT INFLUENCE ON LASER 3D SCANNING, Conference proceedings: 7th International Conference on Industrial Tools and Material Processing Technologies ICIT & MPT, Ljubljana, Slovenia, October 4th-7th 2009; Gašper Gantar, editor, ISBN 978-961-6692-01-4, 2009
  10. A. Talić - Čikmiš, S. Hasanbegović, N. Zaimović-Uzunović, DETERMINATION OF THE OPTIMUM BLANK SHAPE IN RECTANGULAR CUP DRAWING, 13th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2009, Hammamet, Tunisia, 16-21 October 2009
  11. Nermina Zaimović-Uzunović, Daut Denjo: "Influence Quantities For Calibrations In Dimensional Metrology", 6th International conference "Quality 2009" (S.Brdarević, editor), pp 371-376, ISSN 1512-9268, Neum, 04-07 June 2009
  12. Borislav Bošnjak, Nermina Zaimović-Uzunović, Samir Lemeš: "Testing Energetic Efficiency Of Household Appliances", 6th International conference "Quality 2009" (S.Brdarević, editor), pp 295-300, ISSN 1512-9268, Neum, 04-07 June 2009
  13. Nermina Zaimović-Uzunović, Samir Lemeš: "Importance of Metrology Education - B&H Case", Proceedings 1st Regional Metrology Organisations Symposium - RMO 2008; 20th International Metrology Symposium November 12-15, 2008, Cavtat-Dubrovnik, Croatia (Editors: Damir Ilić, Mladen Boršić, Marko Jurčević), pp 262-266, ISBN 978-953-95179-1-3, Cavtat, Croatia, 12-14 Nov 2008
  14. Almir Uzunović, Nermina Zaimović-Uzunović: "Finite element modelling and analysis of trabecular bone using the unit-cell approach", Proceedings of the 12th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2008, (J.Vivancos, S.Yalcin, S.Ekinović, editors), pp 813-816, ISBN 978-9958-617-41-6, Istanbul, Turkey, 26-30 August, 2008
  15. Nermina Zaimović-Uzunović, Samir Lemeš: "FEM analysis of truss hollow section joint", Proceedings of the 12th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2008, (J.Vivancos, S.Yalcin, S.Ekinović, editors), pp 769-772, ISBN 978-9958-617-41-6, Istanbul, Turkey, 26-30 August, 2008
  16. Zaimović-Uzunović, N., Lemeš, S.; Ćurić, D.; Topčić, A.: "Rapid prototyping for sling design optimization", journal "Advances in Production, Engineering & Management", ISSN 1854-6250, accepted for publication 11.7.2007
  17. Lemeš S., Zaimović-Uzunović N.: "Using buckling analysis to predict wrinkling in incremental sheet metal forming", Strojniški vestnik - Journal of Mechanical Engineering 54(2008)2, pp 115-121, ISSN 0039-2480, UDK 621.9
  18. Ištvanić Z., Lemeš S., Zaimović-Uzunović N.: "Buckling mode shapes in incremental forming of sheet metal", 6th International Conference on Industrial Tools and Material Processing Technologies" ICIT&MPT 2007" (K.Kuzman, editor), pp 117-120, ISBN 961-6692-00-7, Bled, Slovenia, 11-14 Sep. 2007
  19. Zaimović-Uzunović N., Lemeš S., Ćurić D., Topčić A.: "Rapid Prototyping For Sling Design Optimization", Proceedings on 1st DAAAM International Specialized Conference on Additive Technologies (I.Drstvenšek, B.Katalinić, editors), pp 5-8, ISBN 3-901509-61-5, Celje, Slovenia, 20 April 2007
  20. Zaimović-Uzunović N., Lemeš S.: "Innovatory master of engineering degree in metrology", 11th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2007 (S.Ekinović, S.Yalcin, J.Vivancos, editors), pp 539-542, ISBN 9958-617-34-8, Hammamet, Tunisia, 5-9 Sep. 2007
  21. Zaimović-Uzunović, N., Uzunović,A.,: Application of CAD Technologies and 
    FEM as a contribution to Tolerance Analysis Approach, 5th Research/Expert
    With International Participation, Quality 2007. pp139-144, June2007.Neum, B&H, ISSN 1512-9268
  22. Zaimović-Uzunović, N.,Jarović, N..,:Implementation of tihe Norms from the Area of Noise Measurement in Laboratories, 5th Research/Expert Conference With International Participation, Quality 2007. pp719-723,June 2007.Neum, B&H ISBN1512-9268
  23. Zaimović-Uzunović N., Ajan E., Lemeš S.: "Weight optimization of the butterfly valve housing", 10th International Research/Expert Conference  "Trends in the Development of Machinery and Associated Technology" TMT 2006 (S.Ekinović, S.Yalcin, J.Vivancos, editors), ISBN 9958-617-28-5,  Barcelona-Lloret de Mar, Spain, 11-15 Sep. 2006
  24. Hodžić, N.,Zaimović-Uzunović, N.,:Numerical Analysis of Hydraulic Oil Flow Through Channels and Chambers of tihe Cylindrical Piston Valve, 10th International Research/Expert Conference,TMT2006,pp 897-900, 2006,Barcelona Spain, ISBN 9958-617-30-7, COBISS.BIH-ID 15090438
  25. Zaimović-Uzunović, N., Žiga, A.: 3D Model of Prosthetic foot with Hydraylic Cylinder, Proceedings of the 9 th International Research/Expert Conference TMT 2005., pp 1085-1089,September 2005, Antalya,Turkey,ISBN 9958-617-28-5. COBISS.BU-ID 14361094.
  26. Zaimović-Uzunović, N., Softić,A.: Uslovi korištenja i principi mjerenja hrapavosti na uređaju Pertometer Concept Device,Proceedings of 4 th Research/Expert Conference with International Participation,Quality 2005,pp 371-375,November 2005, Fojnica,B&H, ISSN 1512-9268
  27. Alić, M.Zaimović-Uzunović,N.,Wiedenhofer,T.: Komparacija software-a za određivanje mjerne nesigurnosti prema GUM standardu,4th Research /Expert Conference with International Participation,Quality 2005, pp247-252,November 2005, Fojnica, B&H, ISSN 1512-9268
  28. Zaimović-Uzunović, N., Softić, A.: Equipment Management in Accreditated, Laboratory for Dimensional Measurements, Proceedings if the 9th International Research /Expert Conference TMT 2005, pp 429-433, September 2005, Antalya,Turkey, ISBN 9958-617-28.5, COBISS.BIH-ID 14361094
  29. Zaimović-Uzunović N., Lemeš S.: "Use Of Finite Element Method Simulation To Shorten Measurement Cycle Of Sheet-Metal Parts With Residual Stresses", 5th International Conference on Industrial Tools "ICIT 2005" (K.Kuzman, editor), pp 97-100, ISBN 961-90401-9-8, Velenje, Celje, Slovenia, 12-15 April 2005
  30. Zaimović-Uzunović, N.:Quality of the Rapid Products,Proceedings of the International Conference, Mechanika 2005,pp 197-200, April 2005., Kauno, Lituania,ISBN 995-09-850-3.
  31. Topčić,A.,Tufekčić,Dž.,Jurković, M., Zaimović-Uzunović,N. : Influence of Processes Parameters on Axial Breaking Force of Parts Produced by Selective Laser Sintering Process, ISSN 0543-5846, METABK 44 (2) 133-136 (2005), UDC-UDK 669.018.95:544.5:620.172=111, Metalurgija 44 (2005)2,133-136
  32. Zaimović-Uzunović, N.,:Neke aplikacije uticaja statičkog i dinamičkog opterećenja na nosivu metalnu konstrukciju, Sarajevo, 2004.
  33. Zaimović-Uzunović, N., Memić, E., Mandžuka, A.: Mathematical Model of Balistic System with Chamber of High Low Pressure, Proceedings of the 4th International Conference Research and Development in Mechanical Industry, RaDMI 2004, pp , August 2004, Zlatibor, Serbia and Montenegro, ISBN
  34. Zaimović-Uzunović, N. Memić,E., Mandžuka, A.: Analytical and Experimental Analysis of the Low Pressure Chamber of Cartidge, Proceedings of the 8th International research/Expert Conference,TMT 2004, pp , September 2005, Neum, Bosnia and Herzegovina
  35. Zaimović-Uzunović N., Lemeš S.: "3D Non-Contact Measurements", Proceedings of the international conference "MECHANIKA - 2004" (M.Daunys, editor), pp 180-184, ISBN 9955-09-630-6, Kaunas, Lithuania, 1-2 April 2004
  36. Smailhodžić,S., Lemeš, S., Zaimović-Uzunović,N. : Dimenziona kontrola zgloba za vodjenje golfa A2, 3rd Research/Expert Conference with International Participation, Quality 2003, pp.263-271, November 13-14, Zenica, B&H
  37. Zaimović-Uzunović, N.: RP postupci u tehnološkim parkovima, studija, "Projekat formiranja naučno-tehnološkog parka u Zenici", Masinski fakultet u Zenici, 2003.
  38. Zaimović-Uzunović, N. Haračić, N.,Memić, E.,Lemeš, S.: Status of Surface and Microstructure in Products Made of Extruded Alluminium,7th International Conference,TMT 2003, pp. 833-837, September 15-17, Barcelona, Spain
  39. Zaimović-Uzunović, N.,Ćurić, D.,Mulabdić, J.,Hadžiahmetović,A.,Lemeš,S.: Application of Rapid Prototyping in Process of Making Tools for Metal Casting, 3rd International Conference "Research and Development in Mechanical Industry", RaDMI 2003, September, 19-23, Herceg-Novi, Serbia and Montenegro
  40. Zaimović-Uzunović,N.,Lemeš, S.,Hadžikadunić,F.,Vukojević,N.:Steam Boiler Displacements as Indicators for Correct Process Conducting, 3rd International Conference "Research and Development in Mechanical Industry", RaDMI 2003, September,19-23, Herceg-Novi,Serbia and Montenegro
  41. Zaimović-Uzunović, N., Ćurić, D. : Optimization of the Parameters of the Injection Moulding in the Plastic Parts Production, Proceedings of the International Conference on Industrial Tools, ICIT2003, pp. 253-257 , April 8-10, Bled,Slovenia
  42. Zaimović-Uzunović, N.: Elaborat o formiranju laboratorije za mjernu tehniku, Mašinski fakultet u Zenici.
  43. Zaimović-Uzunović N., Stapić Ž., Lemeš S.: "Elastic Surfaces of Continuously Loaded Boraboard Panels", Mechanika, No. 3(41), ISSN 1392-1207, Kaunas, Lithuania, 2003
  44. Zaimović-Uzunović, N.,Prnjavorac, M.,Plančić,I.,Nezirović,S.: Oil Pump Housing Control Using Coordinate Measuring Machine, Proceedings of 2nd DAAAM International Conference on Advanced Technologies for Development Countreis ATDC 03,pp 425-430, June 25-28, Tuzla, B&H
  45. Ćurić D., Zaimović-Uzunović N., Ćatović F., Lemeš S.: "Trends and Criterions in Selection of Thermoplastic Material for Injection Moulding", 4th International Scientific Conference on Production Engineering RIM 2003 (I.Karabegović, editor), pp 129-134, ISBN 9958-624-16-8, Bihać, 25-27 Sep. 2003
  46. Smailhodžić S., Lemeš S., Zaimović-Uzunović N.: "Dimensional Analysis of a Guiding Joint of Golf A2", 3rd International conference "Quality 2003" (S.Brdarević, editor), pp 263-270, ISSN 1512-9268, Zenica, 13-14 Nov. 2003
  47. Zaimović-Uzunović N., Lemeš S., Hadžikadunić F., Vukojević N.: "Steam boiler displacements as indicators for correct process conducting", 3rd International conference "Research and development in mechanical industry" RaDMI 2003, ISBN: 86-83803-06-6, Herceg Novi, Serbia and Montenegro, 19-23 Sep. 2003
  48. Zaimović-Uzunović N., Ćurić D., Mulabdić J., Hadžiahmetović A., Lemeš S.: "Application of rapid prototyping in process of making tools for metal casting", 3rd International  conference "Research and development in mechanical industry" RaDMI 2003, ISBN: 86-83803-06-6, Herceg Novi, Serbia and Montenegro, 19-23 Sep. 2003
  49. Stapić Ž., Zaimović-Uzunović N., Lemeš S., Busuladžić M.: "Determination Of Elastic Surfaces For Contiunuously Loaded MDF Panels", Proceedings of 7th international conference "TMT 2003"  (J.Vivancos, F.Puerta, S.Ekinović, S.Brdarević, editors), ISBN/ISSN: 9958-617-18-8, Lloret de Mar, Barcelona, Spain, 15-16 Sep. 2003
  50. Zaimović-Uzunović N., Lemeš S., Memić E., Haračić N.: "Status Of Surface And Microstructures In Products Made Of Extruded Alluminium", Proceedings of 7th international conference "TMT 2003"  (J.Vivancos, F.Puerta, S.Ekinović, S.Brdarević, editors), ISBN/ISSN: 9958-617-18-8, Lloret de Mar, Barcelona, Spain, 15-16 Sep. 2003
  51. Zaimović-Uzunović,N.,Karabegović,I., Rizvanović,M.: Steel Material Mechanical Properties After Years of Complex Loading, Proceedings of the 12th International Conference Metal 2003, No/68, ISBN 80-85988-82-8, May20-23 , Hradec na Moravi,CR
  52. Zaimović-Uzunović N., Lemeš S.: "Applications of Rapid Tooling Techniques for Injection Moulding", Proceedings of the international conference "MECHANIKA - 2003" (M.Daunys, editor), pp 21-24, ISBN 9955-09-404-4, Kaunas, Lithuania, 3-4 April 2003
  53. Zaimović-Uzunović, N.: Istražvanje i obuka kao podrška proizvodnom sektoru, Zbornik radova sa međunarodnog seminara - Pogled u budućnost (Italija - B&H), juni 1998, Zenica, B&H
  54. Vukojević D., Zaimović-Uzunović N., Lemeš S., Vukojević N., Hadžikadunić F.: "An aspect of the stability of the large dimension mechanical constructions", Proceedings of 6th international conference "TMT 2002" (S.Brdarević, S.Ekinović, R.C.Pascual, J.V.Calvet, editors), pp 465-468, ISBN  9958-617-11-0, Neum, 18-21 Sep. 2002
  55. Lemeš S., Zaimović-Uzunović N.: "Mode shapes of centrifugal pump impeller", Proceedings of 6th international conference "TMT 2002" (S.Brdarević, S.Ekinović, R.C.Pascual, J.V.Calvet, editors), pp 421-424, ISBN  9958-617-11-0, Neum, 18-21 Sep. 2002
  56. Lemeš S., Zaimović-Uzunović N.: "Recognition Of Vibration Mode Shapes Using 3D Computer Visualisation", Proceedings of "EAST-WEST VISON 2002" (F.Leberl, A.Ferko, editors), pp 183-188, ISBN 3-85403-163-7, Graz, Austria, 12-13 Sep. 2002
  57. Zaimović-Uzunović N., Lemeš S.: "What type of RP model will be chosen for different kind of products", Proceedings of the international conference "MECHANIKA - 2002" (M.Daunys, editor), pp 65-69, ISBN 9955-09-160-6, Kaunas, Lithuania, 4-5 April 2002
  58. Lemeš S., Zaimović-Uzunović N., Balić S.: "Identification of vibration mode shapes in dynamic analysis of centrifugal pump impeler using finite element method", review paper, journal Mašinstvo 1 (6), pp 15-22, ISSN 1512-5173, Zenica, 2002
  59. Stapić, Ž., Zaimović-Uzunović, N.: Kontraminacija formaldehidom, Zbornik radova 2. Međunarodnog naučno-stručnog skupa, Kvalitet 2001. strane 283-290, novembar 2001, Zenica, Bosna i Hercegovina
  60. Zaimović-Uzunović N., Lemeš S.: "Složena vremenski ovisna sljedivost", 2. međunarodni naučno-stručni skup "Kvalitet 2001" (S.Brdarević, editor), pp 219-222, ISBN 9958-617-10-2, 8-9 Nov. Zenica 2001
  61. Ekinović, E., Zaimović-Uzunović, N.: The Influence of Finite Elements Type on Undamped Critical Speeds of Axisymmetic Rotating Structures, Proceedings of the 4th Jordanian Mechanical and Industrial Engineering Conference, JIME C 2001, October 2001, Amman, Jordan
  62. Zaimović-Uzunović N., Lemeš S., Balić S.: "Materijali i mašine za rapid prototyping", međunarodni simpozij "RIM 2001", pp. 73-78, ISBN: 9958-624-10-9, Bihać, 27-28 Sep. 2001
  63. Zaimović-Uzunović, N., Karabegović, I.., Ćurić, D., Lemeš, S.: "Molds for Casting Vehicle Parts", Proceedings of the 5. Magdeburger Machinenbautage, pp. 205-213, ISBN 3-89722-650-2, Magdeburg, Germany, 19-20 Sep. 2001
  64. Zaimović-Uzunović N., Lemeš S., Petković D.: "Virtual Instruments - A Chance To Teach Engineering At A Distance", International Conference on Engineering Education ICEE 2001, pp 7D1.24-7D1.26, ISBN 1-588-74-091-9, Oslo, Norway, 6-10 Aug. 2001
  65. Zaimović-Uzunović, N., Ćurić, D.: Rapid Tooling Foundry Models Proceedings of the Third International Conference on Industrial Tools, ICIT 2001, pp. 285-288, april 2001, Rogoška Slatina, Slovenia
  66. Zaimović-Uzunović N., Balić S., Ćurić D., Lemeš S.: "Stress strain analysis of the molds for iron casting", International conference "Mechanika - 2001", ISBN: 9986-13-955-4, Kaunas University of Technology, Lithuania, 5-6 April 2001
  67. Zaimović-Uzunović, N., Denjo, D.: Vrste i načini korištenja različitih distribucija u računanju mjerne nesigurnosti, Zbornik radova 5. Međunarodnog naučno-stručnog skupa - Tendencije u razvoju mašinskih konstrukcija i tehnologija, TMT 2000, pp. 274-278, Zenica, 2000
  68. Zaimović-Uzunović N., Balić S., Lemeš S.: "Virtual Prototype Advantages in Product Development Process", Proceedings of 5th international conference "TMT 2000" (S.Brdarević, S.Ekinović, editors), pp 111-114, ISBN  9958-617-06-4, Zenica, 5-6 Oct. 2000
  69. Zaimović-Uzunović, N., Vukojević, D., Karabegović, I.: Investigation of Stress Concentration Factors on Thin Walled Constainers With Holes, Proceedings of the International Conference, Mechanika 2000, pp. 265-271, April 2000, Kauno, Litvania
  70. Zaimović-Uzunović, N.: Uticaj vremena na mjernu sljedivost u nacionalnim laboratorijama, Zbornik radova 1. Međunarodnog naučno-stručnog skupa, Kvalitet 99., pp. 253-260, novembar, 1999. Zenica
  71. Zaimović-Uzunović, N.: Metode brzog razvoja prototipova i njihova primjena, Zbornik radova 2. Međunarodne konferencije, Revitalizacija i modernizacija proizvodnje, RIM 1999, pp. septembar 1999. Bihać
  72. Zaimović-Uzunović, N.: Analiza stanja tehničkih sistema mjerenjem buke, Zbornik radova seminara "Tehnička dijagnostika sistema", Zenica, 1995.
  73. Zaimović-Uzunović, N.: Dijagostika stanja sistema talasnom analizom, Zbornik radova seminara "Tehnička dijagnostika sistema", zenica, 1995.
  74. Zaimović-Uzunović, N.: Defektacija i dijagnostika u funkciji mašinskog održavanja, Zbornik radova seminara "Mašinske tehnologije" Zenica, 1995.
  75. Zaimović-Uzunović, N., Selimović, S.: Projekat rekonstrukcije prikolice, Mašinski fakultet, Zenica, 1997.
  76. Arnaut, M., Brdarević, S., Olević, S., Zaimović-Uzunović, N.: Projekat sistema za pregled vozila namijenjenih za međunarodni drumski transport, Mašinski fakultet, Zenica, 1997.
  77. Zaimović-Uzunović, N., Memić, E.: Istraživanje uticaja parametara unutrašnjeg pritiska na naponsko stanje čahure, Zbornik radova 3. Međunarodnog naučno-stručnog skupa - Tendencije u razvoju mašinskih konstrukcija i tehnologija, Zenica 96, Zenica, 1996.
  78. Zaimović-Uzunović, N.: Naponsko-deformacionos tanje tankostjene posude izložene složenom opterećenju, Zbornik radova 3. Međunarodnog naučno-stručnog skupa - Tendencije u razvoju mašinskih konstrukcija i tehnologija, Zenica 96, Zenica, 1996.
  79. Vukojević, D., Zaimović-Uzunović, N., Balić, S.: Analiza rotaciono-cilindričnog tijela, Mašinski fakultet, 1994.
  80. Zaimović-Uzunović, N., Balić, S, Arnaut, M.: Ispitivanje napona i deformacija na čeličnoj konstrukciji izrađenoj od profilisanog lima, Mašinski fakultet, Zenica, 1995.
  81. Vukojević, D., Zaimović-Uzunović, N., Balić, S.: Prilog izboru i proračunu zglobnih glava prenosnih vretena valjaonice, Zbornik rdova 1. Međunarodnog naučno-stručnog skupa - Tendencije u razvoju mašinskih konstrukcija i tehnologija, Zenica 94, Zenica, 1994.
  82. Zaimović-Uzunović, N., Vukojević, D.: Faktori koncentracije naprezanja tankostjene posude izložene djelovanju stalnog statičkog pritiska, Zbornik radova 1. Međunarodnog naučno-stručnog skupa - Tendencije u razvoju mašinskih konstrukcija i tehnologija, Zenica 94, Zenica, 1994.
  83. Vukojević, D., Zaimović-Uzunović, N.: Mjerenje i analiza zaostalih naprezanja u šinama profila UIC 60, Mašinski fakultet, Zenica, 1992.
  84. Zaimović-Uzunović, N.: Konstrukcioni aspekti izbora i proračuna faktora koncentracije naprezanja tankostjenih posuda u otežanim uslovima rada, doktorska disertacija, Mašinski fakultet, Zenica, 1993.
  85. Vukojević, D., Zaimović-Uzunović, N. i drugi: Analiza opteećenja konstrukcije i staiblnost prese 51 MN, Mašinski fakultet, Zenica, 1992.
  86. Vukojević, D., Zaimović-Uzunović, N.: Analiza naponskih stanja na plaštu VP-4, Mašinski fakultet, Zenica, 1990.
  87. Vukojević, D., Zaimović-Uzunović, N. i saradnici: Mogućnost izrade monobloktočka na postojećim postrojenjima Kovačnice, Mašinski fakutlet, Zenica, 1990.
  88. Vukojević, D., Zaimović-Uzunović, N.: Optimizacija i izbor parametara za konstruisanje i održavanje klipnih pumpi visokog pritiska, Mašinski fakultet, Zenica, 1988.
  89. Brdarević, S., Zaimović-Uzunović, N.:Istraživanje eksploatacionog stanja pogonskih sistema mašina za kontinuirano livenje čelika, Mašinski fakultet, Zenica, 1988.
  90. Brdarević, S., Zaimović-Uzunović, N. drugi: Mogućnosti prerade tehnološkog ostatka od čelika iz RO Željezare Zenica, Preporod i PREMIZ, Mašinski fakultet, Zenica, 1987.
  91. Brdarević, S., Zaimović-Uzunović, N. drugi: Savremeni remonti vrućih agregata za proizvodnju gvožđa i čelika, Mašinski fakultet, Zenica, 1987.
  92. Zaimović-Uzunović, N.: Analiza kućišta zasuna metodom konačnih elemenata, magistarski rad, Mostar, 1985.
  93. Zaimović-Uzunović, N., Pašić H.: Analiza kućišta zasuna metodom konačnih elemenata, Zbornik radova Kongresa mehanike, Bečići, 1984.
  94. Savić, V., Zaimović-Uzunović, N. i saradnici: Razvojno istraživačka studija o mogućnosti konstrukcije i proizvodnje elemenata i uređaja sistema za podmazivanje, Mašinski fakultet, Zenica, 1984.
  95. Bijelić, V., Brdarević, S., Zaimović-Uzunović, N.: Studija mogućnosti razvoja male privrede metalskog kompleksa na području zeničke regije, Mašinski fakultet, Zenica, 1984.
  96. Brdarević, S., Zaimović-Uzunović, N. i saradnici: Studija mogućnosti povećanja i poboljšanja kapaciteta proizvodnog sistema rudarske podgrade u RO "Metalno" Zenica, Mašinski fakultet, Zenica, 1981.
  97. Zaimović-Uzunović, N., Pašić, H.: Analiza naponskog stanja kućišta i poklopca zasuna NP40, NO6, Mašinski fakultet, Sarajevo, 1983.
Expert projects and applied research
  1. Zaimović-Uzunović, N., Vukojević, D., Lemeš,S.,Vukojević,N.,Hadžikadunić, F.: Mjerenje pomjeranja drugog promajnog puta kotla bloka 7-230 MW u hladnom i toplom stanju TE "Kakanj", Kakanj, Mašinski fakultet, ekspertiza, 2002.
  2. Vukojević, D., Zaimović-Uzunović N., Lemeš, S., Vukojević, N., Hadžikadunić,F.: Mjerenje i nalaiza naponsko deformacionog stanja, kompenzatora na kotlu 230 MW u TE "Kakanj" - Kakanj, ekspertiza, Mašinski fakultet, 2001.
  3. Zaimović-Uzunović, N., Vukojević, D., Lemeš,S., Vukojević, N.,Hadžikadunić, N: Mjerenje i analiza dilatacija kotla 230 MW u TE "Kakanj" - Kakanj, ekspertiza, Mašinski fakultet, 2001.
  4. Vukojević, D., Zaimović-Uzunović N., Lemeš, S., Vukojević, N., Hadžikadunić,F.: Preliminarna istraživanja naponsko-deformacionog stanja dijela kotla br.7 u Termoelektrani "Kakanj" - Kakanj, ekspertiza. 2002.
  5. Zaimović-Uzunović, N., Lemeš,S., Haračić, N.: Idejno rješenje mjernog sistema za otkrivanje defekata u poluproizvodu, studija, Mašinski fakultet, 2002.
Webmaster | Updated 06.02.2014