Logo Logo UNZE
    Fakultetska 1, 72000 Zenica, Bosnia and Herzegovina | Tel. +387 32 449 120 | Fax. +387 32 246 612 
 Na bosanskom jeziku  Samir Lemeš, Ph.D. - publications
BOOKS (peer-reviewed)
  1. Lemeš S. (2017) Računarska grafika i geometrijsko modeliranje (Computer Graphics and Geometrcial Modeling), ISBN 978-9958-639-97-5, Univerzitet u Zenici, Zenica
  2. Lemeš S. (2012) Validation of Numerical Simulations by 3D Scanning, ISBN 978-3-8484-0751-4, Lambert Academic Publishing GmbH & Co., Saarbrücken, Germany
  3. Šišić I. (2010) Osnove inženjerstva (Engineering Basics, chapter about computer graphics), ISBN 978-9958-888-01-4, Biotehnički fakultet Univerziteta u Bihaću, Bihać
  4. Zaimović-Uzunović N., Lemeš S., Denjo D., Softić A. (2009) Proizvodna mjerenja, (Production measurements), university book, ISBN 9958-617-44-7, Univerzitet u Zenici, Zenica
  5. Zaimović-Uzunović N., Lemeš S. (2002) Metod konačnih elemenata (Finite element method), university book, ISBN 9958-42-079-1, "Dom štampe", Zenica
  6. Mujičić M., Lemeš S., Heco E. (2001) PC nije bauk III, manual for practical use of personal computers, ISBN 9958-42-060-0, "Dom štampe", Zenica
  7. Olević S., Lemeš S. (1998) Osnovi konstruisanja (Basics in construction), university book, ISBN 9958-617-03-X, Mašinski fakultet, Zenica
  8. Lemeš S., Mujičić M. (1998) PC nije bauk II, manual for practical use of personal computers, ISBN 9958-42-010-4, "Dom štampe", Zenica
  9. Lemeš S. (1995) PC nije bauk, manual for practical use of personal computers, COBISS.BH-ID 856355, Illmija BiH, Sarajevo
BOOKS (non-reviewed)
  1. Havránková Š., Alibegović Đ., Delalić M., Lemeš S. (2016) Sistem okolinskih dozvola u Bosni i Hercegovini - Od fragmentirane do integrisane prevencije i kontrole zagađenja: uporedna analiza sistema i metoda okolinskih dozvola, ISBN 978-80-87651-26-1, Arnika, Prague, Czech Republic, Eko forum, Zenica, BiH
  2. Brdarević S., Bajramović M., Kozlić S., Lemeš S., Borić A., Ekinović J., Arnaut M. (2015) Petnaest godina Univerziteta u Zenici: 2000-2015, ISBN 978-9958-639-71-5, Univerzitet u Zenici
  3. Zahumenská V., Lemeš S., Delalić M., Zatloukalová K., Sobotková J., Skalský M. (2015) Environmental Democracy in Bosnia and Herzegovina: Limping Along, ISBN 978-80-87651-13-1, Arnika, Prague, Czech Republic
  4. Zahumenská V., Lemeš S., Delalić M., Zatloukalová K., Sobotková J., Skalský M. (2015) Demokratija zaštite okoliša u Bosni i Hercegovini: Posustajućim hodom, ISBN 978-80-87651-14-8, Arnika, Prague, Czech Republic
  5. Lemeš, Samir: Aplikativni softver (Applicative software), Pedagoški fakultet u Zenici, WUS Austria, Zenica, 2006
  6. Mujačić, Samra; Lemeš, Samir: Programiranje za Internet (Internet programming), Pedagoški fakultet u Zenici, WUS Austria, Zenica, 2006
  7. Lemeš, Samir; Dautbegović, Džavid: Informatika 3: Qbasic, Pascal, C++, Pedagoški fakultet u Zenici, 2004
PAPERS IN INDEXED JOURNALS
  1. Jašarević S., Miličević Dž., Brdarević S., Lemeš S. (2017) Measurement of organizational culture in public administration: case study of 5 municipalities in Bosnia and Herzegovina, International Journal for Quality Research 11(3): ISSN 1800-6450, pp 655-676, DOI: 10.18421/IJQR11.03-11
  2. Jašarević S., Miličević Dž., Lemeš S., Brdarević S. (2016) Standpoints Of Employees About Introduced Quality Systems In Public Administration On The Sample Of Five Municipalities Of The Zenica-Doboj Canton, Tehnički vjesnik/Technical Gazette (Print: ISSN 1330-3651, Online: ISSN 1848-6339), Vol. 24/No. 6, DOI:10.17559/TV-20160805101058
  3. S. Lemes, D. Strbac, M. Cabaravdic (2013) "Using industrial robot to manipulate the measured object in CMM", International Journal of Advanced Robotic Systems: Industrial Robots, Antonio Visioli (Ed.), Vol. 10, 281: 2013, IF 0.82, ISSN 1729-8806, DOI: 10.5772/56585
  4. Zaimović-Uzunović, N., Lemeš, S.; Ćurić, D.; Topčić, A. (2011): "Rapid prototyping for sling design optimization", Journal "Advances in Production, Engineering & Management" 6(2011)4, pp 271-280, ISSN 1854-6250
  5. Lemeš S., Zaimović-Uzunović N.: "Using buckling analysis to predict wrinkling in incremental sheet metal forming", Strojniški vestnik - Journal of Mechanical Engineering 54(2008)2, pp 115-121, ISSN 0039-2480, UDK 621.9
  6. Zaimović-Uzunović N., Stapić Ž., Lemeš S. (2003): "Elastic Surfaces of Continuously Loaded Boraboard Panels", Mechanics, No. 3(41), pp 18-21, ISSN 1392-1207
PAPERS IN JOURNALS
  1. Karić A., Lemeš S. (2017) Analysis Of Disc Brake Fracture Using Coordinate Measuring Machine And 3D CAD Modeling, journal Mašinstvo 14(2), pp 69-74, ISSN 1512-5173
  2. Plančić I., Petković D., Lemeš S., Bašić H. (2015) Research on impact factors influencing roundness of products made of Al 99.5% formed by flow forming technology, Annals of the Faculty of Engineering Hunedoara - International Journal of Engineering 13 (2), pp 103-106, ISSN 1584-2665
  3. Narayanan R., Lemeš S., Spužić S., Mulcahy D., Pignata S., Uzunović F., Fraser K. (2014) Knowledge transfer in postgraduate research and education, Asian Journal of Education and e-Learning 2(6), pp 490-498, ISSN: 2321-2454
  4. Lemeš S. (2005) Digitalizacija kulturnog nasljeđa, Zbornik radova Pedagoškog fakulteta u Zenici 3(3), pp 323-332, ISSN 1512-9195
  5. Lemeš S., Zaimović-Uzunović N., Balić S. (2002) Identification of vibration mode shapes in dynamic analysis of centrifugal pump impeler using finite element method, review paper, journal Mašinstvo 1 (6), pp 15-22, ISSN 1512-5173
  6. Lemeš S., Haračić N. (1998) Internet as a source of scientific and technical information, conference paper, journal Mašinstvo 3 (2), pp 131-140, ISSN 1512-5173
  7. Lemeš S. (1997) Use of classic drawings in CAD process using vectorization, professional paper, journal Mašinstvo 2 (1), pp 85-90, ISSN 1512-5173
CONFERENCE PAPERS IN INDEXED PROCEEDINGS
  1. Zaimović-Uzunović N., Lemeš S. (2017) Cylindricity Measurement on a Coordinate Measuring Machine, International Scientific-Technic Conference "Manufacturing 2017", Poznan, Poland, 24-26.10.2017, Advances in Manufacturing (A. Hamrol, O. Ciszak, S. Legutko, M. Jurczyk, Eds.) Springer International Publishing, ISBN: 978-3-319-68618-9, DOI: 10.1007/978-3-319-68619-6_80, pp 825-835
  2. Lemeš S., Čabaravdić M., Zaimović-Uzunović N. (2013) Robotic manipulation in dimensional measurement, Proceedings of the XXIV International Conference on Information, Communication and Automation Technologies ICAT 2013 (J. Velagić, editor), Paper ID: 44, ISBN: 978-1-4799-0430-3, DOI: 10.1109/ICAT.2013.6684085, Sarajevo, 30.10-01.11.2013
  3. Zaimović-Uzunović N., Lemeš S. (2010) Influences of Surface Parameters On Laser 3D Scanning, IMEKO Conference proceedings: International Symposium on Measurement and Quality Control 2010 (ISMQC2010, September 5-9, 2010, Osaka, Japan), Yasuhiro Takaya, editor, pp 408-411, ISBN: 978-1-61782-019-9
  4. Zaimović-Uzunović N., Lemeš S. (2008) Importance of Metrology Education - B&H Case, Proceedings 1st Regional Metrology Organisations Symposium - RMO 2008; 20th International Metrology Symposium November 12-15, 2008, Cavtat-Dubrovnik, Croatia (Editors: Damir Ilić, Mladen Boršić, Marko Jurčević), pp 262-266, ISBN 978-953-95179-1-3, Cavtat, Croatia, 12-14 Nov 2008
CONFERENCE PAPERS
  1. Bajtarević A., Lemeš S., Hadžikadunić F. (2017) Measurement Of Roller Bearing Geometry Deviations Using Coordinate Measuring Machine, 13th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2017, (Z. Tanasić, editor) pp 751-756, ISBN 978-99938-39-73-6, Banja Luka, 26-27.5. 2017
  2. Lemeš S. (2017) Tehnike modeliranja zakrivljenih površina, 10th International conference "Quality 2017" (S.Brdarević, S. Jašarević, editors), pp 179-186, ISSN 1512-9268, Neum, 17-20.5.2017
  3. Lemeš S. (2017) Računarstvo u oblaku kao alat za razmjenu CAD podataka, 10th International conference "Quality 2017" (S.Brdarević, S. Jašarević, editors), pp 39-46, ISSN 1512-9268, Neum, 17-20.5.2017
  4. Jašarević S., Miličević Dž., Brdarević S., Lemeš S. (2016) Measurement of organizational culture in public administration: case study of 5 municipalities in Bosnia and Herzegovina, Proceedings of the 10th International ICQME Conference "Quality, Management, Environment, Education, Engineering", (Z. Krivokapić, editor), Petrovac, Montenegro, pp 162-181, ISBN 978-9940-527-49-5, 28-30.9.2016.
  5. Lemeš. S. (2016) Izazovi održavanja velike količine grafičkih podataka, 4. konferencija Održavanje - Maintenance 2016 (S. Brdarević, S. Jašarević, urednici), pp 137-143, ISSN 1986-583X, Zenica, 2-4.6.2016
  6. Lemeš S., Jašarević S., Kubat A. (2015) Quality Infrastructure For Furniture Testing In Bosnia & Herzegovina, 2nd international conference "Functioning and improvement of management systems" (P. Nowicki, T. Sikora, editors), pp 95-102, ISBN 978-83-942362-5-0, Kraków - Niepołomice, Poland, 17-19.6.2015
  7. Zaimović-Uzunović N., Lemeš S., Bašić H., Softić A., Haračić H. (2015) Kriteriji za izbor optimalnog metoda kalibracije volumena etalonske posude, 9th International conference "Quality 2015" (S.Brdarević, S. Jašarević, editors), pp 165-170, ISSN 1512-9268, Neum, 10 12.6.2015
  8. Lemeš S. (2015) Standardization in Engineering Curriculum, 9th International conference "Quality 2015" (S.Brdarević, S. Jašarević, editors), pp 335-340, ISSN 1512-9268, Neum, 10-12.6.2015
  9. Spahić D., Kačmarčik J., Karač A., Lemeš S. (2015) Primjena E-learning platformi u visokom obrazovanju, 9th International conference "Quality 2015" (S.Brdarević, S. Jašarević, editors), pp 409-414, ISSN 1512-9268, Neum, 10-12.6.2015
  10. Lemeš S., Berberović E., Karač A. (2014) Learning Outcomes of Mathematics and ICT in Mechanical Engineering Curricula, Proceedings of the International Professional Conference ME4CataLOgue (D. Kozak, editor), pp 172-177, ISBN 978-953-6048-76-2, Slavonski Brod, Croatia, 4.12.2014
  11. Plančić I., Petković D., Lemeš S., Bašić H. (2014) Istraživanje uticajnih faktora na kružnost izradaka od Al 99,5 % oblikovanih tehnologijom istosmjernog hladnog rotacionog istiskivanja, 2. međunarodna naučna konferencija COMETa 2014 "Primijenjene tehnologije u mašinskom inženjerstvu" (B. Marković, R. Antunović, M. Kraišnik, editors), pp 69-74, ISBN 978-99976-623-1-6, Jahorina, BiH, 2-5.12.2014
  12. Lemeš S. (2014) Integracija IT i bibliotečkih resursa i njihova uloga u rangiranjima univerziteta, zbornik radova konferencije "Kvalitet usluga i standardi" (S. Dizdar,A. Rešidbegović, B. Sabljaković, urednici), Asocijacija informacijskih stručnjaka - bibliotekara, arhivista i muzeologa BiH, ISBN 978-9926-8028-1-3, pp. 93-103, Sarajevo, 10.10.2014
  13. Jašarević S., Lemeš S. (2014) QMS in higher education study programs in Bosnia and Herzegovina, Proceedings of the 8th International Conference ICQME (Z. Krivokapić, M. Perović, editors), pp 41-50, ISBN 978-9940-527-39-6, Tivat, Montenegro, 24-25.9.2014
  14. Jašarević S., Lemeš S. (2014) Needs analysis of enterprises in Bosnia and Herzegovina from the aspect of QMS, Proceedings of the 8th International Conference ICQME (Z. Krivokapić, M. Perović, editors), pp 51-60, ISBN 978-9940-527-39-6, Tivat, Montenegro, 24-25.9.2014
  15. Lemeš S. (2014) Održavanje računarskih sistema, 3. konferencija Održavanje - Maintenance 2014 (S. Brdarević, S. Jašarević, editors), pp 53-60, ISSN 1986-583X, Zenica, 11-13.6.2014
  16. Šabić D., Štrbac D., Lemeš S., Čabaravdić M. (2013) Upgrade of A Robot Workstation for Positioning of Measuring Objects on CMM, Proceedings of the 17th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2013, (S. Ekinović, J. Vivancos Calvet, S. Yalcin, editors), pp 393-396, ISSN 1840-4944, Istanbul, Turkey, 10-11 September 2013
  17. Lemeš S. (2013) Uloga javno dostupnih on-line materijala u rangiranju univerziteta, 8th International conference "Quality 2013" (S.Brdarević, S. Jašarević, editors), pp 543-548, ISSN 1512-9268, Neum, 06-08 June 2013
  18. Lemeš S., Zaimović-Uzunović N., Ališić Š., Memić H. (2012) Development Of Competences Of National Reference Laboratory For Mass Measurement, Proceedings /5th International Symposium on Industrial Engineering - SIE2012, June 14-15, 2012., Belgrade, (Editors: Milanović D.D., Spasojević-Brkić V., Misita M.) pp 273-276, ISBN 978-86-7083-758-4
  19. Ćurić D., Lemeš S., Zaimović-Uzunović N. (2011) Non-proportional shrinkage compensation, Conference proceedings: 8th International Conference on Industrial Tools and Material Processing Technologies ICIT & MPT, Ljubljana, Slovenia, October 2nd-5th 2011; Janez Marko Slabe, editor, pp 173-176 ISBN 978-961-6692-02-1
  20. Lemeš S. (2011) Information Security Management of Web Portals Based on Joomla CMS, Proceedings of the 15th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2011, (S. Ekinović, J. Vivancos, E. Tacer, editors), pp 509-512, ISSN 1840-4944, Prague, Czech Republic, 12-18 September 2011
  21. Haračić N., Lemeš S., Domuz A. (2011) Analysis of Gear Damage Causes using Microhardness and Metallographic Testing, Proceedings of the 15th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2011, (S. Ekinović, J. Vivancos, E. Tacer, editors), pp 201-204, ISSN 1840-4944, Prague, Czech Republic, 12-18 September 2011
  22. Mrđanović E., Lemeš S., Zaimović-Uzunović N. (2011) Funkcionalna analiza dizajna okova za masivni namještaj (Functional Analysis of the Bed Hinge Design), 7th International conference "Quality 2011" (S.Brdarević, S. Jašarević, editors), pp 323-328, ISSN 1512-9268, Neum, 01-04 June 2011
  23. Lemeš S., Emruli D., Muminović B. (2011) Kalibracija dinamičke sile u visokofrekventnom pulzatoru (Calibration of Dynamic Force in High-Frequency Pulsator), 7th International conference "Quality 2011" (S.Brdarević, S. Jašarević, editors), pp 467-472, ISSN 1512-9268, Neum, 01-04 June 2011
  24. Lemeš S., Zaimović-Uzunović N. (2009) Study Of Ambient Light Influence On Laser 3D Scanning", Conference proceedings: 7th International Conference on Industrial Tools and Material Processing Technologies ICIT & MPT, Ljubljana, Slovenia, October 4th-7th 2009; Gašper Gantar, editor, ISBN 978-961-6692-01-4, 2009
  25. Bošnjak B., Zaimović-Uzunović N., Lemeš S. (2009) Ispitivanje energetske učinkovitosti kućanskih aparata, 6th International conference "Quality 2009" (S. Brdarević, editor), pp 295-300, ISSN 1512-9268, Neum, 04-07 June 2009
  26. Zaimović-Uzunović N., Lemeš S. (2008) FEM analysis of truss hollow section joint, Proceedings of the 12th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2008, (J.Vivancos, S.Yalcin, S.Ekinović, editors), pp 769-772, ISBN 978-9958-617-41-6, Istanbul, Turkey, 26-30 August, 2008
  27. Ištvanić Z., Lemeš S., Zaimović-Uzunović N. (2007) Buckling mode shapes in incremental forming of sheet metal, 6th International Conference on Industrial Tools and Material Processing Technologies" ICIT&MPT 2007" (K.Kuzman, editor), pp 117-120, ISBN 961-6692-00-7, Bled, Slovenia, 11-14 Sep. 2007
  28. Vukojević D., Vukojević N., Lemeš S., Ištvanić Z. (2007) Analysis of tool radius on vessel head quality made by incremental plastic deformation, 11th International Research/Expert Conference  "Trends in the Development of Machinery and Associated Technology" TMT 2007 (S.Ekinović, S.Yalcin, J.Vivancos, editors), pp 87-90, ISBN 9958-617-34-8, Hammamet, Tunisia, 5-9 Sep. 2007
  29. Zaimović-Uzunović N., Lemeš S. (2007) Innovatory master of engineering degree in metrology, 11th International Research/Expert Conference  "Trends in the Development of Machinery and Associated Technology" TMT 2007 (S.Ekinović, S.Yalcin, J.Vivancos, editors), pp 539-542, ISBN 9958-617-34-8, Hammamet, Tunisia, 5-9 Sep. 2007
  30. Zaimović-Uzunović N., Lemeš S., Ćurić D., Topčić A. (2007) Rapid Prototyping For Sling Design Optimization, Proceedings on 1st DAAAM International Specialized Conference on Additive Technologies (I.Drstvenšek, B.Katalinić, editors), pp 5-8, ISBN 3-901509-61-5, Celje, Slovenia, 20 April 2007
  31. Zaimović-Uzunović N., Ajan E., Lemeš S. (2006) Weight optimization of the butterfly valve housing, 10th International Research/Expert Conference  "Trends in the Development of Machinery and Associated Technology" TMT 2006 (S.Ekinović, S.Yalcin, J.Vivancos, editors), ISBN 9958-617-28-5,  Barcelona-Lloret de Mar, Spain, 11-15 Sep. 2006
  32. Zaimović-Uzunović N., Lemeš S. (2005) Use Of Finite Element Method Simulation To Shorten Measurement Cycle Of Sheet-Metal Parts With Residual Stresses, 5th International Conference on Industrial Tools "ICIT 2005" (K.Kuzman, editor), pp 97-100, ISBN 961-90401-9-8, Velenje, Celje, Slovenia, 12-15 April 2005
  33. Lemeš S. (2004) Digitalizacija kulturnog nasljeđa, Stručni skup "Zavičajne zbirke - čuvari kulturnog nasljeđa i identiteta, Zenica, 29-30 oktobar 2004.
  34. Zaimović-Uzunović N., Lemeš S. (2004) 3D Non-Contact Measurements, Proceedings of the international conference "MECHANIKA - 2004" (M.Daunys, editor), pp 180-184, ISBN 9955-09-630-6, Kaunas, Lithuania, 1-2 April 2004
  35. Ćurić D., Zaimović-Uzunović N., Ćatović F., Lemeš S. (2003) Trends and Criterions in Selection of Thermoplastic Material for Injection Moulding, 4th International Scientific Conference on Production Engineering RIM 2003 (I.Karabegović, editor), pp 129-134, ISBN 9958-624-16-8, Bihać, 25-27 Sep. 2003
  36. Smailhodžić S., Lemeš S., Zaimović-Uzunović N. (2003) Dimenziona kontrola zgloba za vođenje Golfa A2, 3rd International conference "Quality 2003" (S.Brdarević, editor), pp 263-270, ISSN 1512-9268, Zenica, 13-14 Nov. 2003
  37. Zaimović-Uzunović N., Lemeš S., Hadžikadunić F., Vukojević N. (2003) Steam boiler displacements as indicators for correct process conducting, 3rd International conference "Research and development in mechanical industry" RaDMI 2003, ISBN: 86-83803-06-6, Herceg Novi, Serbia and Montenegro, 19-23 Sep. 2003
  38. Zaimović-Uzunović N., Ćurić D., Mulabdić J., Hadžiahmetović A., Lemeš S. (2003) Application of rapid prototyping in process of making tools for metal casting, 3rd International  conference "Research and development in mechanical industry" RaDMI 2003, ISBN: 86-83803-06-6, Herceg Novi, Serbia and Montenegro, 19-23 Sep. 2003
  39. Stapić Ž., Zaimović-Uzunović N., Lemeš S., Busuladžić M. (2003) Determination Of Elastic Surfaces For Contiunuously Loaded MDF Panels, Proceedings of 7th international conference "TMT 2003"  (J.Vivancos, F.Puerta, S.Ekinović, S.Brdarević, editors), ISBN/ISSN: 9958-617-18-8, Lloret de Mar, Barcelona, Spain, 15-16 Sep. 2003
  40. Zaimović-Uzunović N., Lemeš S., Memić E., Haračić N. (2003) Status Of Surface And Microstructures In Products Made Of Extruded Alluminium, Proceedings of 7th international conference "TMT 2003"  (J.Vivancos, F.Puerta, S.Ekinović, S.Brdarević, editors), ISBN/ISSN: 9958-617-18-8, Lloret de Mar, Barcelona, Spain, 15-16 Sep. 2003
  41. Zaimović-Uzunović N., Lemeš S. (2003) Applications of Rapid Tooling Techniques for Injection Moulding, Proceedings of the international conference "MECHANIKA - 2003" (M.Daunys, editor), pp 21-24, ISBN 9955-09-404-4, Kaunas, Lithuania, 3-4 April 2003
  42. Vukojević D., Zaimović-Uzunović N., Lemeš S., Vukojević N., Hadžikadunić F. (2002) An aspect of the stability of the large dimension mechanical constructions, Proceedings of 6th international conference "TMT 2002" (S.Brdarević, S.Ekinović, R.C.Pascual, J.V.Calvet, editors), pp 465-468, ISBN  9958-617-11-0, Neum, 18-21 Sep. 2002
  43. Lemeš S., Zaimović-Uzunović N. (2002) Mode shapes of centrifugal pump impeller, Proceedings of 6th international conference "TMT 2002" (S.Brdarević, S.Ekinović, R.C.Pascual, J.V.Calvet, editors), pp 421-424, ISBN  9958-617-11-0, Neum, 18-21 Sep. 2002
  44. Lemeš S., Zaimović-Uzunović N. (2002) Recognition Of Vibration Mode Shapes Using 3D Computer Visualisation, Proceedings of "EAST-WEST VISON 2002" (F.Leberl, A.Ferko, editors), pp 183-188, ISBN 3-85403-163-7, Graz, Austria, 12-13 Sep. 2002
  45. Zaimović-Uzunović N., Lemeš S. (2002) What type of RP model will be chosen for different kind of products, Proceedings of the international conference "MECHANIKA - 2002" (M.Daunys, editor), pp 65-69, ISBN 9955-09-160-6, Kaunas, Lithuania, 4-5 April 2002
  46. Zaimović-Uzunović N., Lemeš S. (2001) Složena vremenski ovisna sljedivost, 2. međunarodni naučno-stručni skup "Kvalitet 2001" (S.Brdarević, editor), pp 219-222, ISBN 9958-617-10-2, 8-9 Nov. Zenica 2001
  47. Zaimović-Uzunović N., Lemeš S., Balić S. (2001) Materijali i mašine za rapid prototyping, međunarodni simpozij "RIM 2001", pp. 73-78, ISBN: 9958-624-10-9, Bihać, 27-28 Sep. 2001
  48. Zaimović-Uzunović N., Karabegović I., Ćurić D., Lemeš S. (2001) Molds for Casting Vehicle Parts, Proceedings of the 5. Magdeburger Machinenbautage, pp. 205-213, ISBN 3-89722-650-2, Magdeburg, Germany, 19-20 Sep. 2001
  49. Zaimović-Uzunović N., Balić S., Ćurić D., Lemeš S. (2001) Stress strain analysis of the molds for iron casting, International conference "Mechanika - 2001", ISBN: 9986-13-955-4, Kaunas University of Technology, Lithuania, 5-6 April 2001
  50. Zaimović-Uzunović N., Lemeš S., Petković D. (2001) Virtual Instruments - A Chance To Teach Engineering At A Distance, International Conference on Engineering Education ICEE 2001, pp 7D1.24-7D1.26, ISBN 1-588-74-091-9, Oslo, Norway, 6-10 Aug. 2001
  51. Petković D., Lemeš S., Ječmenica M., Vivancos J.C. (2001) Is it possible to have high quality of education if level of industrial development is low?, International Conference on Engineering Education ICEE 2001, pp 7B1.17-7B1.21, ISBN 1-588-74-091-9, Oslo, Norway, 6-10 Aug. 2001
  52. Zaimović-Uzunović N., Balić S., Lemeš S. (2000) Virtual Prototype Advantages in Product Development Process, Proceedings of 5th international conference "TMT 2000" (S.Brdarević, S.Ekinović, editors), pp 111-114, ISBN  9958-617-06-4, Zenica, 5-6 Oct. 2000
  53. Balić S., Lemeš S. (1999) Differential Form of Basic Profile Coupling Equations Applied to Operative Elements of Gerotor Pumps, 4th International Conference "Design to Manufacture in Modern Industry DMMI '99", ISSN: 1580-1330, Podčetrtek, Slovenia, 20-21 Sep. 1999
  54. Lemeš S. (1996) Računarske mreže kao neophodan dio informacionih sistema, Međunarodni naučno-stručni skup "Tendencije u razvoju mašinskih konstrukcija i tehnologija", pp 315-321, Zenica, Oct. 1996
PRESENTATIONS AT SEMINARS AND CONFERENCES (Without Proceedings)
  1. Monitoring zagađenja zraka u Zenici, Okrugli sto "Izvještaj o kvalitetu zraka u Tuzli, Lukavcu, Zenici i Sarajevu u 2016. godini-preporuke i mjere", Centar za ekologiju i energiju Tuzla, Fondacija Heinrich Böll, 19.10.2017
  2. CAD/CAM, aditivne tehnologije i brza izrada prototipa, stručno usavršavanej nastavnika srednjih škola, Travnik, 28.8.2017
  3. To what extent is the new environmental permit for ArcelorMittal Zenica really integral?, Prezentacija nove analize okolišne legislative i učešća javnosti u odlučivanju o okolišu, Arnika, Sarajevo, 12.6.2017
  4. Sustainable development Goals in the Balkan Region, Conference "Reducing Chemicals and contamination of drinking water sources in rural communities in Bosnia and Herzegovina, Macedonia and Albania", WECF, Sarajevo, 9.5.2017
  5. Environmental activism in Bosnia and Herzegovina, BH Diasporic Conference, Washington D.C., USA, 29.4.2017
  6. European Research Council - mogućnosti finansiranja istraživačkih projekata, javno predavanje, Univerzitet u Zenici, 9.1.2017
  7. Kako povećati vidljivost publikacija (Kako se registrovati i koristiti Google Scholar, ResearchGate, Orcid), javno predavanje, Univerzitet u Zenici, 27.12.2016
  8. Dimnjaci su naše tihe ubice - koliko otrova u jednom udisaju, Institut za zdravlje i sigurnost hrane Zenica, Zenica, 3.6.2016
  9. Uloga NVO u provođenju PRTR Protokola i korištenju PRTR podataka, radionica "Jačanje kapaciteta i podrška razvoju PRTR sistema u Bosni i Hercegovini", Regional Environmental Center Sarajevo, 16.2.2016
  10. Ekologija: problemi i rješenja - kako sačuvati životnu sredinu?, Američki kutak Opće biblioteke u Zenici, Zenica, 23.10.2015
  11. Iskustva NVO u BiH sa okolišnim dozvolama – slučaj ArcelorMittal Zenica, konferencija Integrirana prevencija kao sredstvo za zaštitu okoliša, Univerzitet u Zenici, Zenica, 17.9.2015
  12. Demokratija zaštite okoliša u praksi: iskustva civilnog društva, Prezentacija alternativnog izvještaja o implementaciji Aarhuške konvencije u BiH, OSCE BiH, Sarajevo, 16.9.2015
  13. Eko forum Zenica 2009-2015: od protesta do pristupa pravdi, Tribina "Treći stub Aarhuške konvencije: pristup pravdi", Arnika i Pravni fakultet Univerziteta u Zenici, Zenica, 16.4.2015
  14. Clean air campaign in Zenica 2008-2014, Arnika, Prague, Czech Republic, 11.12.2014
  15. NGO Eko forum Zenica: Aarhus convention from heart, UNEP Regional Major Group and Stakeholder meeting for the EECCA Region, Batumi, Georgia, 19.11.2014
  16. Obstacles for PRTR implementation in B&H from the perspective of pollution victims, Workshop "PRTR Register in B&H: How acces to information can reduce industrial pollution?", Arnika/Eko forum/OSCE, Sarajevo, 14.11.2014
  17. Priznavanje inostranih visokoškolskih kvalifikacija u ZDK - od kvalifikacija do akademskih zvanja, okrugli sto "Priznavanje inozemnih visokoškolskih kvalifikacija - dobre i loše prakse", Centar za informisanje i priznavanje dokumenata iz oblasti visokog obrazovanja BiH, Mostar, 5.11.2014
  18. Ka održivom razvoju, prezentacija za studente Odsjeka za geografiju na Filozofskom fakultetu Univerziteta u Ljubljani, Slovenija, Zenica, 22.05.2014
  19. Stanje okoliša u Zenici - problemi, posljedice i rješenja, osnovna škola "Hasan Kikić" Tetovo, Zenica, 14.04.2014
  20. IT kao podrška održavanju, seminar "Računarski sistemi za potporu procesima održavanja - CMMS", Društvo održavalaca u BiH, Mašinski fakultet Univerziteta u Zenici i Ekonerg d.o.o. Zagreb, Zenica, 08.04.2014
  21. Problemi aerozagađenja u Zenici, Studentski centar Zenica, 26.12.2013
  22. Pregled postojećeg stanja, prezentacija aktivnosti i stavova Efektivne koalicije - unapređenje stanja okoliša u FBiH, EU IPA projekat "EFECTive Action", Zenica, 11.10.2013
  23. 3D CAD modeliranje (AutoCAD, Solidworks), seminar, Regionalna razvojna agencija REZ Zenica, 22.2.2013
  24. Napredne tehnike 3D modeliranja, seminar, Regionalna razvojna agencija REZ Zenica, 15.12.2013
  25. Iskustva civilnog društva u implementaciji trećeg stuba Aarhuske konvencije u BiH - glavne prepreke pristupu pravosuđu u BiH, Okrugli sto "Implementacija trećeg stuba Aarhuske konvencije u Bosni i Hercegovini", Centar za edukaciju sudija i tužilaca FBiH Sarajevo, 27.06.2012
  26. Mogućnosti i zakonska osnova ranog monitoringa okolišnih zagađenja od strane organizacija civilnog društva, Okrugli sto "Evidentiranje okolišnih problema i uspostavljanje sistema monitoringa kvaliteta zraka", Fondacija Heinrich Böll, Centar za ekologiju i energiju Tuzla, Helsinški komitet za ljudska prava u BiH, Zenica, 19-21.4.2012
  27. Pregled serije standarda ISO 27000, Seminar "Sistemi upravljanja ISO/IEC 27001:2005 i ISO 9001:2008", IPI Zenica, Asocijacija za kvalitet u BiH, Vanjskotrgovinska/spoljnotrgovinska komora BiH, Sarajevo, 22.03.2012
  28. Inicijativa građanskog monitoringa i zagovaranja u vezi pitanja okoliša, Radionica "Pravo građana BiH na zdravu životnu sredinu", Centar za menadžment, razvoj i planiranje - MDP Inicijative Doboj, Derventa, 17.3.2012
  29. Inicijativa građanskog monitoringa i zagovaranja u vezi pitanja okoliša, Seminar "Osnaživanje učešća javnosti u procesima donošenja odluka o ekološkim pitanjima u skladu sa Arhuskom konvencijom", Centar za menadžment, razvoj i planiranje - MDP Inicijative Doboj, Teslić, 14.12.2011
  30. EOQ-PRU shema certifikacije menadžera kvaliteta, Asocijacija za kvalitet u BiH, Šesta konferencija kvaliteta u BiH, Tuzla, 9-11.11.2011.
  31. Sigurnost Joomla CMS-a, Prva bosanskohercegovačka Joomla!Day konferencija "Ilirija 2011", Tešanj, 12-14.8.2011
  32. Uvod u informacionu sigurnost prema standardu BAS ISO/IEC 27001, Seminar "Sistemi upravljanja ISO/IEC 27001:2005 i ISO 9001:2008", IPI Zenica, Asocijacija za kvalitet u BiH, Sarajevo, 28.01.2011
  33. Internet s aspekta tehnologije, Javno predavanje "Internet i informaciono-komunikacione tehnologije", Katolički školski centar "Sveti Pavao" Zenica, 26.5.2011
  34. CAD info radionica, radionica, Regionalna razvojna agencija REZ Zenica, Vitez, 21.10.2010
  35. CAD/CAM/CAE tehnologije, radionica, Regionalna razvojna agencija REZ Zenica, Jelah, 13.10.2010
  36. Obrazovni sistem u BiH – reforme, rješenja i problemi u obrazovanju na putu ka EU, debata „Uloga mladih u procesu evropskih integracija“, Friedrich Ebert Stiftung, Žepče, 16.10.2009
  37. eLearning obrazovanje na Univerzitetu u Zenici, projekat "Support to higher education in BH for 2005-2007", WUS Austria, BH eLearning Task Force, 24.12.2007
  38. Implementacija strategije informacionog društva u BiH, International Information Society Symposium, Istanbul, Turska 30.10-3.11.2006
  39. Linux i sigurnost računarskih sistema, 2. Zenica Linux Seminar, Linux User Group, Zenica, 15.10.2005
  40. Akademske i istraživačke mreže, 1. Zenica Linux Seminar, Linux User Group, Zenica, 28.11.2004
THESES AND DISSERTATIONS
  1. Validation of numerical simulations by digital scanning of 3D sheet metal objects, Ph.D. thesis, Mechanical Engineering Faculty in Ljubljana, Slovenia, 23.6.2010, DOI: 10.13140/RG.2.1.4389.0003
  2. "Vibracije centrifugalnih pumpi u sistemima za hlađenje automobilskih motora" (Vibrations of centrifugal pumps in automotive engine cooling systems), master thesis, Mašinski fakultet u Zenici, 14.2.2002
  3. "Optimizacija sekundarnog cjevovoda dvolinijskog centralnog sistema za podmazivanje" (Optimization of secundary pipeline of two-line central greasing system), diploma thesis, Mašinski fakultet u Zenici, 7.6.1993
BOOK REVIEWS
  1. Review of scientific monograph "Sistem kvaliteta i organizacione kulture u jedinicama lokalne samouprave" (2016), by Sabahudin Jašarević and Džeraldina Miličević, Politehnički fakultet Univerziteta u Zenici
  2. Review of university book "Kalibracija mjernih uređaja za mehanička ispitivanja" (2015), by Mirsada Oruč and Branka Muminović, Fakultet za metalurgiju i materijale Univerziteta u Zenici
  3. Review of university book "Osnovi zdravstvene informatike" (2014), by Suad Sivić, Zdravstveni fakultet Univerziteta u Zenici
  4. Review of university book "Ispitivanja metalnih materijala II - defektoskopija" (2012), by Mirsada Oruč and Raza Sunulahpašić, Fakultet za metalurgiju i materijale Univerziteta u Zenici
  5. Review of translated standard BAS EN 55024:2006 Information technology equipment - Immunity characteristics - Limitations and measurement methods (CISPR 24:1997, modified)
  6. Book review "Flow-Induced Vibration" (2000), SAVIAC Current Awareness, USA
OTHER PUBLICATIONS
  1. T. Jungwirth (2017) Demokratija životne sredine: napredak neprijavljen - Izvještaj iz sjene sprovođenja Arhuske konvencije u Bosni i Hercegovini, Saradnici: V. Bjelić, M. Delalić, S. Jukan, V. Junuzović, S. Lemeš, R. Pilipović, M. Skalský, Z. Vachůnová, Arnika – Centar podrške građanima (Češka Republika), ISBN: 978-80-87651-32-2
  2. T. Jungwirth (2017) Environmental democracy: progress unreported - Aarhus Convention shadow implementation report Bosnia and Herzegovina, Contributors: V. Bjelić, M. Delalić, S. Jukan, V. Junuzović, S. Lemeš, R. Pilipović, M. Skalský, Z. Vachůnová, Arnika –Citizens Support Centre (Czech Republic), ISBN: 978-80-87651-31-5
  3. Lemeš S. (2014) Kako možemo učestvovati u programu Erasmus+?, student web portal Sigma
  4. Lemeš S. (2014) Tražite odgovornost za kriminal, news portal ZenicaBlog,
  5. Lemeš S. (2013) Kako tumačiti podatke o aerozagađenju sa novih displeja?, student web portal Sigma
  6. Dajić M., Lemeš S. (2013) Državni izvještaj o stanju okoliša u BiH je neupotrebljiv, Oslobođenje 24039, ISSN 2232-9986, pp 30-31
  7. Mujkić S., Lemeš S. (2013) Nema milosti prema odgovornima, podnosimo krivične prijave zbog zagađenja, online magazine Žurnal
  8. Dajić M., Lemeš S. (2013) Borbu za čist zrak niko neće ispolitizirati, Oslobođenje, ISSN 2232-9986
  9. Lemeš S. (2012) Generalna skupština Evropske organizacije za kvalitet (EOQ), Poslovne novine 1230, ISSN 0353-4626, pp 52
  10. Lemeš S. (2012) Razvoj novih shema akreditovanja u BiH, Poslovne novine 1223, ISSN 0353-4626, pp 64-65
  11. Lemeš S. (2011) EOQ-PRU shema certifikacije menadžera kvaliteta, Poslovne novine 1220, ISSN 0353-4626, pp 80-81
  12. Lemeš S. (2011) Šesta konferencija kvaliteta BiH, Poslovne novine 1219, ISSN 0353-4626, pp 44-45
  13. Lemeš S. (2011) Sedmi međunarodni naučno-stručni skup - Kvalitet 2011, Poslovne novine 1217, ISSN 0353-4626, pp 96-98
  14. Lemeš S. (2007) 100+ megabita za univerzitete!, INFO magazin 119, ISSN 1512-5084
  15. Lemeš S. (2003) Vratite nam Biharnet!, INFO magazin 65, ISSN 1512-5084
  16. Lemeš S. (2001) Programski jezik bez naredbi?, INFO magazin 42-43, ISSN 1512-5084
  17. Lemeš S. (2001) CAD ubuduće samo online, INFO magazin 41, ISSN 1512-5084
  18. Lemeš S. (2001) CAD alat za Star Wars, INFO magazin 40, ISSN 1512-5084
  19. Kafedžić A.; Lemeš S. (2000) Peštanska škola, INFO magazin 34, ISSN 1512-5084
  20. Lemeš S. (1999) Grupni e-mail account preko jedne e-mail adrese, INFO magazin 20, ISSN 1512-5084
  21. Lemeš S. (1999) Mercedes za CAD, INFO magazin 17, ISSN 1512-5084
  22. Lemeš S. (1999) Biharnet, INFO magazin 17, ISSN 1512-5084
  23. Lemeš S. (1998) CAD za mašinstvo, INFO magazin 12, ISSN 1512-5084
  24. Kesić K., Gazija A., Zdenac M., Čičak M., Lemeš S. (2006) Vodič za izvoz u Evropsku uniju /zašto i kako izvoziti u EU /, REZ – Regionalna razvojna agencija za regiju Centralna BiH
  25. Translation of stabdard (English to Bosnian) BAS ISO/IEC 17799:2006 Informaciona tehnologija - Sigurnosne tehnike - Pravilo dobre prakse za upravljanje sigurnošću informacija
  26. Lemeš S. (1992) Ispitivanje uticaja vrste kugličnog ležaja na vlastite vibracije vratila metodom konačnih elemenata, scientific paper awarded by Foundation "Hasan Brkić", Sarajevo
WEB PORTALS
  1. Mechanical Engineering Faculty Zenica, www.mf.unze.ba (PHP dynamic portal, until 2008)
  2. NGO Sezam Zenica, www.sezam.com.ba (until 2004)
  3. University of Zenica, www.unze.ba
  4. Faculty for Education Zenica, www.pf.unze.ba (until September 2006)
  5. Association for quality in BiH, www.aqbih.ba
  6. Alba Zenica, www.alba.ba
  7. Zenička industrija mlijeka ZIM Zenica, www.zim.ba (until 2009)
  8. RMK Promet Zenica, www.rmkpromet.ba (ASP dynamic application)
  9. Library Zenica, www.biblioze.ba
  10. Drvopromex Bugojno, www.drvopromex.com.ba
  11. Carllato Nova Bila, www.carllato.ba
  12. Tvornica opruga Uskoplje-Gornji Vakuf, www.tvornica-opruga.ba
  13. Metalorad Turbe, www.metalorad.com.ba
  14. Drvo-san Prusac, www.drvo-san.com
  15. Remontni Zavod Travnik, www.rzt.com.ba
  16. Journal "Zeničke sveske", www.zesveske.ba
  17. Elementary school "Musa Ćazim Ćatić" Zenica, www.osmccze.edu.ba
  18. Postgraduate course "Metrology", www.pomacom.unze.ba
  19. Chair for automation and metrology , www.unze.ba/am
  20. Live@edu student portal, www.student.unze.ba
  21. NGO Eko forum Zenica, www.ekoforumzenica.com.ba
  22. Project for promotion of quality in B&H, www.kvalitet.ba
  23. Career center of the University of Zenica, www.cc.unze.ba
  24. International conference TMT, www.tmt.unze.ba
  25. International conference Quality, www.quality.unze.ba
  26. International conference Maintenance, www.odrzavanje.unze.ba
  27. Center for innovation and enterpreneurship, www.cip.unze.ba
  28. Polytechnic Faculty Zenica, www.ptf.unze.ba

MENTORSHIP – MASTER THESES

  1. Mensura Sušić (31.12.2014) Mjeriteljska infrastruktura za indikatore okolišnih performansi kod malih i srednjih preduzeća, mentor: prof.dr. Nermina Zaimović-Uzunović, co-mentor: doc.dr. Samir Lemeš, postgraduate study "Upravljanje kvalitetom", Mechanical Engineering Faculty in Zenica
  2. Amela Skopljak (17.10.2014) Optimizacija dizajna dijelova autopodizača, mentor: prof.dr. Nermina Zaimović-Uzunović, co-mentor: doc.dr. Samir Lemeš, postgraduate study "Konstruiranje mašina", Mechanical Engineering Faculty in Zenica
  3. Selima Bašić (2012-) Akreditacija ispitnih laboratorija u infrastrukturi kvaliteta u BiH, mentor: prof.dr. Nermina Zaimović-Uzunović, co-mentor: doc.dr. Samir Lemeš, postgraduate study "Metrologija", Mechanical Engineering Faculty in Zenica
  4. Mirnes Duraković (2012-) Eksperimentalna verifikacija modela za simulaciju rasprostiranja polutanata iz industrijskih postrojenja i kućnih ložišta, mentor: doc.dr Samir Lemeš, postgraduate study "Okolinsko inženjerstvo", Mechanical Engineering Faculty in Sarajevo
  5. Štrbac Damir (17.10.2012) Uporaba industrijskog robota za pozicioniranje mjerenog objekta na koordinatnom mjernom stroju, mentor: doc.dr. Malik Čabaravdić, co-mentor: doc.dr. Samir Lemeš, postgraduate study "Metrologija", Mechanical Engineering Faculty in Zenica
Webmaster | Updated 02.11.2017